Canberra Concrete Resurfacing
Concrete resurfacing in Canberra that puts a fresh plain, patterned or decorative face on sound concrete, with no demolition or tip fees.
Concrete Resurfacing Canberra
Concrete Resurfacing in Canberra refreshes worn, stained or cracked concrete by applying a new decorative or protective surface over the existing slab. It is a cost-effective way to improve appearance, restore grip and extend the life of driveways, paths, patios and pool surrounds. It is faster and cleaner than replacing. Tell us the condition of your concrete and the look you want, and we will inspect for cracks and drainage before recommending overlays, colours and sealers. Canberra's frosts and sun age concrete quickly, so careful repair helps resurfaced slabs in Kingston, Woden and Belconnen last. Expect a fresh, durable finish.
- No demolition or disposal — We work over your current slab, so you skip the break-out, truck hire and tip fees
- Plain or decorative — Pick a single colour, a texture, a stencilled pattern or a full spray-on look
- Days, not weeks — A typical home job takes us two or three days on site, start to finish
- Needs a stable slab — Any movement underneath shows back up through the new layer, so the base must be solid
- Candidacy checked first — We check your concrete before pricing it and say so if replacing is the better call
Get a quote for concrete resurfacing
Share a few details and you'll have a fixed written quote from us within one business day.
Canberra Concrete Resurfacing Services
Tired concrete that's still solid underneath? Here's what a fresh surface can do for it.
Driveway makeovers
If your driveway's faded, oil-stained or just looking its age, a bonded overlay gives it a brand-new face while the slab underneath stays put.
Pool deck refresh
We'll give a tired pool deck a slip-resistant finish that's kind on bare feet in January, all without touching the shell, coping or fencing.
Patios and alfresco areas
Got a new extension or fresh paint on the house? We'll bring the outdoor slab up to match so the whole backyard finally feels finished.
Patterns and stencils
Fancy the look of brick, slate or tile without relaying a thing? Stencilled patterns go into the overlay itself, so it's a total change of style.
Indoor floor levelling
Thin screeds and overlays even out a bumpy or patchy indoor slab, so your new tiles, timber or vinyl go down flat and stay that way.
Cracks fixed first
Lay an overlay over an untreated crack and it'll show straight back through. We repair cracks and joints before anything new goes on top.
Canberra Concrete Resurfacing Process
Most of the effort on a resurfacing job goes in before you see any new material, and that groundwork is what decides whether the finish holds. First we'll look hard at your slab and give you a straight answer on whether it's a good candidate. If it's lifting, shifting or cracked right through, any topping will split along the same lines inside twelve months, and you'd be better off replacing it. When the base is sound, we fix the cracks, grind the surface so the new layer can grip, lay and finish the overlay, then seal it and tell you when it'll need doing again.
Slab Assessment
We'll check your concrete is solid enough to take a new layer, and if it isn't, we'll tell you before you spend anything.
Repair & Surface Preparation
We repair cracks and recut joints, then clean and grind the surface so the overlay can really grip.
Overlay & Finish
We spread the new layer evenly and work it into the look you chose — plain, textured or patterned.
Cure, Seal & Handover
Once cured, it's sealed with a product that copes with frosty mornings and summer UV, and we walk it with you before it's back in use.
Why Choose Our Concrete Resurfacing Experts in Canberra
Most overlay failures start with a slab that should never have been resurfaced. Our job is spotting that before you pay.
We'll turn it down if it won't last
Concrete that's shifted or cracked right through will just break the overlay too, so we'll be upfront and save you the money.
Preparation not skipped
Crack repair, grinding and a proper clean all get done in full. It's hidden once finished, and it's exactly where shortcuts show.
Joints carried through
We cut your existing control joints back into the new layer, so any cracking follows the lines we've planned for it.
Slip rating on wet areas
On pool decks and steps we finish for grip underfoot when wet, even if a smoother finish would be quicker to lay.
Priced against replacement
If replacing is a real option too, you'll get prices for both and can weigh up the difference yourself.
Workmanship guarantee
We stand behind our own work. Movement in the old slab below isn't something an overlay can control, and we'll explain that in writing first.
Concrete Resurfacing questions we get asked in Canberra
Quick answers to what Canberra homeowners usually ask us before getting a price.
How can I tell if my concrete just needs resurfacing?
A stable slab resurfaces well. If yours is cracked right through, lifting, rocking underfoot or sitting on a failed base, a topping will split along the same lines within a year, and replacing is the better spend.
How long does resurfacing take?
Most jobs take a few days once you count repairs, application and curing time, depending on the size and how much fixing comes first. Prep takes longer than laying the new layer.
Why is preparation so important?
Prep is the bulk of the work, and it's the first thing a bargain quote quietly drops. We cut out and repair cracks, then grind the surface so the new layer has a profile to bond to.
Will the old cracks show through?
Cracks we've repaired get covered over. But if a crack is still moving, it'll eventually come back through any topping. That's a structural problem, so we look for it before we price the job.
How long does a resurfaced floor last?
With good prep and regular resealing, you'll get many years from it. We'll give you an honest reseal timeframe at handover, and with Canberra's strong UV and winter frosts it's usually sooner than the label says.